2-Way Solenoid Valves
|
||
One inlet and one outlet, and are used to permit and shut off fluid flow. The two types of operations are “Normally Closed” and “Normally Open”. |
General Service – Air/Inert Gas, Water, Lt. Oil (up to 300 SSU) service at moderate temperatures. |
||
* 8030 Series |
Direct Acting Low Pressure/Vacuum – 3/8″-3/4″
|
|
* 8040 Series |
High Flow / Low Pressure - 1/8″-3/8″
|
|
* 8210 Series |
Air/Inert Gas, Water, Lt. Oil – 3/8″–2 1/2″
|
|
* 8215 Series |
Low Pressure - Air/Inert Gas – 3/8″–3″
|
|
* 8221 Series |
Slow Closing /Anti-Water Hammer – 3/8″-2 1/2″
|
|
* 8223 Series |
High Pressure – 1/4″-3/4″Pilot operated solenoid valve available in a normally closed construction. They are a rugged piston construction built to withstand high pressures and are available AC or DC with brass and stainless steel bodies. Ideal for high pressure water applications (up to 1500 PSI). |
|
* 8256 Series |
Sub-Miniature Poppet - 1/8″ Direct acting, normally closed solenoid valves. Available either AC or DC operated in brass or 316 stainless steel bodies and with or without manual operators. Small poppet valve well suited for a wide variety of Air, Water, Lt. Oil Applications. Recommended for use in place of the 8225 Series valves. |
|
* 8260 Series |
Plastic Body, Air / Water – 1/4″Direct acting valve available in a normally closed construction. Available AC or DC operated with plastic bodies designed to handle the challenges of harsh media. Ideal for water dispensing applications. |
|
* 8262 Series |
Direct Acting Poppet – 1/8″-1/4″
|
|
* 8263 Series |
Direct Acting Poppet, Normally Closed – 3/8"
|
|
* 8280 Series |
Group Mounted Sub-Miniature Poppet - 1/8"
|
|
Hot Water / Steam – High temperature fluid applications such as laundries, molding, sterilizing, autoclaves, steam atomization, etc.
|
||
* 8210HW Series |
Hot Water, Normally Closed – 3/8″–3/4″
|
|
* 8220 Series |
Hot Water/Steam – 3/8″ – 2 1/2″
|
|
* 8221HW Series |
Slow Closing Hot Water – 3/8″-21/2″
|
|
* 8222 Series |
High Temperature Fluids, Normally Closed – 1/4″ – 1″
|
|
* 8263 Series |
Direct Acting Poppet, Normally Closed – 1/8″-3/8″
|
|
* 8267 Series |
Direct Acting – Straight Thru Design – 3/8″-3/4″ |
|
Potable Water and Food Service - NSF listed valves designed for use in drinking water systems and food service equipment.
|
||
* 8256 Series |
Direct Acting 1/8"- 1/4"
|
|
Vacuum - Designed for Low Vacuum (to 29″Hg) to High Vacuum (to 10-6 Torr) Applications.
|
||
* 8030VM / 8030VH Series |
Direct Acting – 3/8″-3/4″
|
|
* 8210VM / 8210VH Series |
Pilot Operated Diaphragm – 3/8″–3/4″
|
|
* 8215VM / 8215VH Series |
Pilot Operated Diaphragm – 1″–2″
|
|
* 8262VVM / 8262VVH Series |
Direct Acting Poppet – 1/4″
|
|
Cryogenic and Liquid CO2 – Designed to control Cryogenic fluids to –320°F (-196°C) and Liquid CO2 to –75°F (-59°C).
|
||
* 8210LT Series |
Cryogenic – 1″–1 1/2″
|
|
* 8222LT Series |
Cryogenic – 1/2″-3/4″
|
|
* 8262LT/ 8263LT Series |
Cryogenic – 1/8″-3/8″Direct acting normally closed solenoid poppet valves available either AC or DC operated with brass bodies for liquid oxygen, liquid argon, and liquid nitrogen applications. |
|
* 8264 Series |
Liquid CO2 – 1/8″
|
|
Air Operated – Uses auxiliary compressed air or water source to shift valve, rather than a solenoid operator.
|
||
* F210 / P210 Series |
Air/Inert Gas, Water, Lt. Oil – 3/8″–2″Air operated 2/2 valves available in normally closed and normally open constructions with brass bodies and NBR seals. |
|
* F222 / P222Series |
Air/Inert Gas, Water, Lt. Oil – 1/4″–1/2″
|
|
* F262 / P262Series |
Air/Inert Gas, Water, Lt. Oil – 1/4″
|
|
* 8290 Series |
Harsh Fluids, Hot Water/Steam, Air, Water, Lt. Oil – 3/8″–2 1/2″Heavy duty angle-body piston valves for tough applications including corrosives, light slurries and steam. Available in normally closed and normally open constructions with bronze and Stainless Steel bodies and PTFE discs. Now available the Miniature 32mm Operator, Proportional Valves and Linear Position Indicator. |
|
Proportional – Electrical input signal provides proportional control of the pressure or flow output.
|
||
* 8202 / 8203 Series |
Air/Gas/Water/Lt Oil/Low Vacuum - 1/8″-1/2″
|
|
Intrinsically Safe – Designed solely for use in intrinsically safe areas with properly approved and sized current and voltage limiting barriers.
|
||
* WBIS8262 Series |
Direct Acting Poppet – 1/4″
|
|
* WBIS8223 Series |
Piston Valve – 3/8″-1/2″
|
|
Low Power - Low wattage coil to provide PLC compatibility, reduced battery drain, reduced wiring cost, reduced heat rise, energy savings.
|
||
* 8262 Series |
Direct Acting Poppet – 1/4″
|
|
* 8223 Series |
Piston Valve – 3/8″-1/2″
|
|
Isolation / Shielded Core – Harsh and corrosive fluid control applications.
|
||
* D8260 Series |
Plastic Body – 1/4″
|
|
* D8030 Series |
Brass/ Stainless Steel Body – 3/8″-3/4″
|
|
Long Life / Quiet – Designed for quiet operation and long life, up to 20 million cycles, in dry air or gas applications.
|
||
* 8210Q Series |
5 million cycle capability – 3/8″–3/4″
|
|
* 8215Q Series |
5 million cycle capability – 1″–2″
|
|
* 8262Q Series |
20 million cycle capability – 1/8″–1/4″
|
|
Ammonia – Designed for use with anhydrous and gaseous ammonia.
|
||
* 8262NH Series |
Ammonia Service- 1/8"--1/4"Available in Normally Closed constructions with Stainless Steel bodies. Features aluminum shading coil with Neoprene elastomer. Available in AC and DC. |
|
Dry Air – Designed for use in applications which require air to be free of lubricants.
|
||
* 8262P Series |
Dry Air - 1/4"Direct acting soleonid poppet valves available in normally closed constructions with brass and stainless steel bodies. |
|
Magnetic Latching – Ideal for remote applications where continuously powered devices can’t be used, such as irrigation systems.
|
||
* MU8262 Series |
Magnetic Latching - 1/8"-3/8"Available in normally closed constructions with brass and stainless steel bodies. Good for applications where contiuous power supply is not readily available. DC constructions only. |