Ball Valves Product List
1. BALL VALVE TYPE 21(15-100mm)[1/2-4inch]
• Easy to Be Automated (No Modification require)
Featuring a new intregal molded top flange. The BALL VALVE TYPE 21 can easily be converted from the manual to automatic without replacing the body.
• Simple Installation on Panel Piping
New bottom stand with an insert hole allows the valve to be secured on bench or panel only by inserting a metallic insert.
• Double-O-ring
The stem uses a double-O-ring, sealing arrangement improving durability sealing performance. The upper O-ring groove is deeper than the lower O-ring groove. Because of this design, the stem would break first at the upper O-ring groove, acting as a back up seal.
• Multi Functional Handle
Removing the handle and placing the raised lugs into the carrier allow for easy disassembly of the valve. * The handle has another color.(blue, white, yellow).
• EQUIPPED WITH TOP FLANGE, ALLOWING FOR EASY CHANGE TO AUTOMATIC
VALVE.
• COMES WITH BOTTOM STAND TO FACILITATE MOUNTING ON RACKS AND PANELS.
• DOUBLE O-RING ON THE STEM IMPROVES DURABILITY AND SEALING PROPERTY.
2. WATER BV(15-50mm)[1/2-2inch]
• Most suitable valve for water
Water BV can be used for water, seawater and therefore have reasonable price.
(This valve is not recommended for chemical fruid).
• Easy to Be Automated(No Modification Required)
Featuring a new integral molded top flange. The WATER BV can easily be converted from the manual to automatic without replacing the body.
• Double-O-ring
The stem uses a double-O-ring, sealing arrangement improving durability sealing performance. The upper O-ring groove is deeper than the lower O-ring groove. Because of this design, the stem would break first at the upper O-ring groove, acting as a back up seal.
• Multi Functional Handle
Removing the handle and placing the raised lugs into the carrier allow for easy disassembly of the valve.
• EQUIPPED WITH TOP FLANGE, ENABLING EASY CHANGE TO AUTOMATIC VALVE.
(Change to an automatic valve requires an actuator set)
• TYPE 21 FOR CHEMICAL SOLUTION LINES AND WATER BALL VALVE FOR WATER/SEA
WATER LINES CAN BE SELECTIVELY USED, WHICH CONTRIBUTES TO TOTAL COST
REDUCTION.
3. 3-WAY BALL VALVE TYPE 23(15-100mm)[1/2-4inch]
• Compact and Economic
The 3-WAY BALL VALVES allows two flow patterns, using one valve. The valve is suitable for a pipeline which requires two ball valves and a tee. That is, the 3-WAY BALL VALVES is economic because it makes piping compact and saves space.
• Reversible Flow Direction
The 3-WAY BALL VALVE is based on the Asahi true union ball valve design which can be installed or removed only by tightening or loosening its union nut.
• Newly Equipped ISO Mounting Flange
This new feature provides for easier mounting of actuators on valves.
• Interchangeable with Ball Valve Type21
The face to face dimensions, as well as the connecting parts, end connectors and union nuts, are the same as the ball valve Type21.
• Other Special Features
Double O-ring seal on stem for an added protection. W-L port ball and * Cross port ball are available upon request. Note: Cross port ball is available at the size of 15mm (1/2inch) up to 50mm (2inch). Built-in spanner wrench on the handle for valve disassembly and assembly.
• ENABLE SWITCHING BETWEEN TWO FLOW PATHS AND COMPLETE CLOSING. (ONLY
ONE VALVE IS NECESSARY IN A LINE CONVENTIONALLY REQUIRING TWO BALL
VALVES).
• THE SHAPE OF VALVE ELEMENT (BALL) IS SELECTABLE FROM THREE KINDS,
ALLOWING FOR SWITCHING OF FLOW DIRECTION ACCORDING TO THE
APPLICATION.
4. 3-WAY BALL VALVE TYPE 23H(25-40mm)[1-1 1/2inch]
• Horizontal Model
The 3-Way BALL VALVE TYPE 23H is horizontal model(T port).
•Same Features as TYPE23
a) Compact and Economic
b) Reversible Flow Direction
c) Equipped ISO Mounting Flange
d) Interchangeable with Ball Valve Type21.
• HORIZONTAL 3 WAY BALL VALVE.
• T-SHAPED FLOW PATH ALLOWS FOR EASY SWITCHING OF FLOW CHANNEL.
• END CONNECTOR AND UNION NUT ARE COMPATIBLE WITH 3 WAY BALL VALVE TYPE
23.
• The LAB COCK is a compact, light weight plastic valve which is highly corrosion-resistant, in durable.
• LIGHT-WEIGHT AND COMPACT PLASTIC VALVE WITH EXCELLENT CORROSION
RESISTANCE, FLOW CHARACTERISTICS DURABILITY AND FUNCTIONALITY
• WIDE SELECTION FORM A PRODUCT LINE OF 16 TYPES
• OCTAGON BODY ALLOWING FOR EASY PIPING WITH SPANNER
• FLOW CONTROL IS AVAILABLE.
6. COMPACT BALL VALVE TYPE 27 (13-50mm)[3/8-3inch]
• New Design
Fully redesigned allows to less handle operation, and small face-to-face dimension
• Compact
With small number of components and light weight, compact design, suitable for installation in a narrow space and ideal for facility piping plants.
• Full Bore Design
The spherical valve element allows for a straight flow path and extremely small fluid resistance. (Excellent water characteristics) No risk of difficult handle operation due to thermal expansion or construction.
• PTFE Seat
Using PTFE, the seat is highly resistant to corrosion, chemical and abrasion.
• WITH A SMALL NUMBER OF COMPONENTS AND LIGHT WEIGHT, COMPACT DESIGN,
SUITABLE FOR INSTALLATION IN A NARROW SPACE AND IDEAL FOR FACILITY
PIPING IN PLANTS.
• THE SPHERICAL VALVE ELEMENT ALLOWS FOR A STRAIGHT FLOW PATH AND
EXTREMELY SMALL FLUID RESISTANCE. (EXCELLENT WATER CHARACTERISTICS)
• NO RISK OF DIFFICULT HANDLE OPERATION DUE TO THERMAL EXPANSION OR
CONTRACTION.• USING PTFE, THE SEAT IS HIGHLY RESISTANT TO CORROSION,
CHEMICALS AND ABRASION.
FOR MORE INFORMATION ABOUT THE PRODUCT
PLEASE CLICK LINK BELOW
CATALOG.PDF