Injection valve
Injection valve
Injection valve
Our injection valve :
For any fluid, good “crust breaking” function. Metal/metal seating for abrasive or polymerising fluid.
DN 15 to DN 200 |
1/2" to 8" |
PN 10 to PN 420 |
150 to 2500 Lbs |
Functions – Injection valve
♦ feeding valve: installed on tank/reactor walls or dome
♦ injection valve: mounted on a section of piping
Sealing system
♦ Metal-to-metal seating with conical piston
♦ Radial soft seating with packing, o’rings, etc.
Operation
Handwheel or crank according to size, double acting pneumatic actuator, single acting pneumatic actuator (depending on size/pressure class and/or stroke), hydraulic actuator, electric actuator, air motor.
Closing device
piston with conical seating, straight piston
Operating principle – Injection valve
– Shutter : Polished piston
– Sealing : With stuffing box (repackable in service)
– “No dead zone” design for accurate mesurement
Fabrication – Injection valve
- Construction materials : Carbon Steel (CS), Stainless Steel (SS), Duplex & Super Duplex, Inconel & Incoloy®, Titanium, Zirconium, Uranus® B6, Tantalum, Nickel, Hastelloy®, Monel
- Construction Methods : Fabricated (Welded), Cast
Uses – Injection valve
- Service conditions : High pressure, High temperature, Low temperature, Abrasion, Corrosion
- Types of fluids : Liquids, Liquids with solid particles, Gas, Powder and powdery media, High viscosity fluids
- Applications : Fine chemicals, Plastics and polymers