The Other Fittings, Cement and Piping Materials Product List
1. MULTI-JOINT
• High Safety Factor By A Molding
(Multi-Joint Type "L" with Female connection 40mm - 150mm) They are produced by "Injection molding" which provides customers with complete reliability and durability.
• Specifications
Types : Type "L", Type"T" Sizes : 20mm - 200mm (JIS standard) Connection : Both types are classified by female and socket connection respectively, which enable users to have multiple selections in connection with sensors, sampling valves, etc.
• Designed By CAE Analysis
Multi-Joint is designed in a way to optimize many factors relating to piping stress by "CAE Hydromechanical Analysis".
• High Performance
Such unique design as above gives customers not only high pressure resistance in short term but also resistance against periodic pressure change in long term. And the Multi-Joint made by machining are all passed through tough tests in our factory and then delivered to our customers.
• Chemical Resistance & High Purity
Since the material is "High Purity PVC", the "Joint" has excellent chemical resistance and extremely low leaching performance. And almost all the processes are controlled in our clean room to keep their performance as perfect as possible.
• The PREFAB JOINT can be installed easily, fast and securely.
• The PREFAB JOINT, when placed in a pipeline, facilitates cleaning the pipeline.
• The body of the PREFAB JOINT can be removed from a pipeline only by loosening its union nut.
Thus it is suitable for pipelines which are frequently disconnected, such as temporary pipelines
and slurry pipelines.
• Thermal stress of pipe line is to be absorbed due to its sufficient allowable axial movement on
elongation and contraction.
• With union type end connection, it allows fast diassembly by losening the union nut only.
• With simplified design,it requires minim space in the piping sys-tems, and there is no need of
expansion U-bend.
• Earthquake resistant design; Allowable axial movement-Elongation contraction.
• Internal stop design prevents the expension portion from being removed.
• Short Joint for Transformation End with the Rubber Ring.
• Joints conforming to the JWWA (JAPAN WATER WORKS ASSOCIATION) standards range in
nominal size from 200 to 300mm(8inch to 12inch).
5. FRP FLOOR STAND
• Valve Operating Stand for Gate Valve with Square Nut Option.
6. BOLT & NUT and WASHER
• PVC
Nominal Size : M8 to M20
• PVC
Nominal Size:16mm(1/2inch) ï¼ 200mm(8inch).
• AV Cement No.32 and No.52 are suitable for small AV TS flanges and Fittings.
• AV Cement No.62 is suitable for large AV FITTINGS and AV DV Fittings.
• AV Cement No.88 is for only C-PVC Pipe and Fittings.
• AV Cement No.90 is suitable for for HI-PVC Pipe and Fittings.
• AV Cement No.100 and 102 are colored White for PVC Pipe and Fittings.
・AV Cement No.32 and No.52 are suitable for small AV TS flanges and
FITTINGS.
・AV Cement No.62 is suitable for large AV FITTINGS and AV DV FITTINGS.
・AV Cement No.100 and No.102 are suitable for AV HI-PVC and HP-PVC
FITTINGS.
9. GAUGE FLANGE
• Excellent corrosion resistance and in chemical resistance
• A high level of strength supported by the wafer-like forms to enable compact piping
• Equipped with a plug to facilitate maintenance of the detection channel
• Acting as a sample fluid outlet after a cock is attached
• Lightweight and easy to instal
• Lower in cost than the conventional model
10. ASAHI AV IAM LOCK
• FEATURE 1
This joint is exclusively for ASAHI AV PP pipes and ASAHI PPLEX pipes.
ASAHI PPLEX PIPES
• FEATURE 2
No tools or secondary materials are necessary for instalation.
• FEATURE 3
This joint is easy to instal. Simply insert a pipe and fasten the nut.
• FEATURE 4
All the components that contact fluid are made of plastics. They have no risk of corrosion.
11. DIAPHRAGM PRESSURE GAUGE
• For the pressure receiving element, a Teflon, stainless steel, tantalum or other diaphragm with a high
level of corrosion resistance has been adopted. The bourdon tube is filled with an antifreeze solution for
food. Depending on the type of diaphragm, it is blocked from the indicator. This allows pressure
measurements without in influx of the fluid subject to measurement in the bourdon tube.
• Three are two types of diaphragm-type pressure gauges that differ in the attachment element. One is the
screw type and the other is the flange type.
FOR MORE INFORMATION ABOUT THE PRODUCT
PLEASE CLICK LINK BELOW
CATALOG WEB